Interactive · three.js
Welding Cart 3D Model
Orbit the whole cart, look underneath at the caster pockets, or switch the equipment off to see the open bench bay and its corner pads. Every tube, plate and rebar rail is drawn at its real size.
Loading 3D model…
- 1×2 frame and posts
- 11 ga deck
- Caster plates & gussets
- Rebar
- Bench
- Welder + cooler
- Cylinders
- Plasma
Drag to orbit, scroll or pinch to zoom. The bench body is drawn to measured size. Bench height, welder height and plasma size are stand-ins.
What to look for
- Underside view: the four caster pockets are 1×2 boxes around orange doubled 11 ga plates. That's how the deck gets down to about 6⅞" while using 5" casters.
- Untick Equipment: the bay under the bench is open. The bench sits on three corner pads and one caster pocket plate.
- Welder end view: the rebar side rail and four hooks hold the lead and power-cable coils just outside the footprint.
- Back view: the two cylinders chain to the spine posts, the five TIG rod tubes sit in the corner, and the plasma tucks under the middle shelf.
Get the model
The same model is available as a STEP assembly with about 70 named bodies, in millimeters. Open it in Fusion 360 or any CAD tool that imports STEP. The download page explains how it's organized.
Prefer paper? The shop drawings have every dimension.